ProLine Series Braided Stainless Steel Washing Machine Connector, 60 inch, Dual Pack (496-212DP)
The washer's supply hoses hold full pressure all day. A fresh pair on the schedule the guide gives, every five to seven years, is the cheapest fix on this shelf.
By B&K (ProLine Series). Specs read from the maker on .
Price and stock: B&K product page (where to buy)
| In the box | Two connectors, one hot and one cold |
|---|---|
| Length | 60 inches |
| Ends | 3/4 inch female hose thread both ends, rubber washers included |
| Build | Reinforced PVC inner tube under 304 stainless steel braid |
| Pressure | 125 PSI working, 180 PSI maximum, from the maker's specification table |
| Temperature | 33 to 180°F |
| Warranty | 1-year limited |
| Burst rating | Not stated by the maker |
"Not stated by the maker" means the maker's pages do not say; this shelf leaves it blank rather than guess.
Know before you buy
A braid does not make a hose immune; it still ages, so it still gets replaced on schedule and a sensor still goes behind the machine. The maker's description says 250 PSI and its specification table says 180 PSI maximum; this shelf prints the lower. The maker lists a California Proposition 65 notice for DEHP and lead.
Where each spec was read
- B&K: 496-212DP product page (Description and Specifications) read 2026-10-27
Read first
Every link on this site is a plain link to the maker's own page. The site earns nothing from them today; if that changes, this note will name the program on every page. No maker pays for placement.
Notes drafted with a language model from the maker's pages above and checked against them. Product information, not plumbing or electrical advice: a licensed plumber and your local code decide what is safe in your house.
Found an error? See Corrections.